Hydraulic Plunger Walking Hydraulic Motor Suitable for Excavators Cranes

• Customization: Available
• Certification: ISO9001
• Excitation Mode: Excited
• Model NO.: BM1 BM2 BM3
• Power Rating: 1500W
• Casing Protection: Protection Type
• Number of Poles: 6
• Speed: Low Speed
• Type: Cycloid
• Weight: Motor 17kg
• Defects Liability Period: 6 Months
• Authentication: Ios
• Pressure Bearing Mode: Internal Pressure
• Motor Type: Other
• Exhaust Volume: 80cm3
• Maximum Flow Rate: Standard
• State: New Motor
• Colour: Blue Motor
• Mada Shaft: Flange
• Transport Package: Wooden Case
• Specification: 35*20*18
• Trademark: Yongcheng
• Origin: Shandong
• HS Code: 8412291000
• Production Capacity: 5000/Month

Product Description

Product Description

Introduction of hydraulic motor
The hydraulic motor is an executive component of the hydraulic system, which converts the liquid pressure energy provided by thehydraulic pump into the mechanical energy (torque and speed) of its output shaft. Liquid is the medium of transmitting force andmotion.

                    

 

 

Radial piston hydraulic motor
    The working principle of the radial piston type hydraulic motor is that when the pressure oil enters the bottom of the piston in the cylinder body through the window of the fixed oil distribution shaft 4, the piston extends outwards and firmly presses against the inner wall of the stator, because there is an eccentric distance between the stator and the cylinder block.
    At the contact point between the plunger and the stator, the reaction force between the stator and the plunger is. The force can be decomposed into two components.
    When the oil pressure acting on the bottom of the plunger is p, the diameter of the plunger is D, and the angle between the force and is x, the force produces a torque on the cylinder block and makes the cylinder block rotate. The cylinder block then outputs the torque and speed through the transmission shaft connected with the end face.

 

 

technical parameter

 

technical parameter
Displacement(ml/r)		100	160	200	250	315	400
Flow(LPM)	Continuous	58	58	58	58	58	58
	Intermittent	68	68	68	68	68	68
Speed(RPM)	Continuous	551	344	276	220	175	140
	Intermittent	646	404	323	258	205	162
Pressure(Mps)	Continuous	14	14	12.5	11	9	9
	Intermittent	17	17	15	13	11	10
Torque(N*m)	Continuous	178	285	318	350	360	418
	Intermittent	216	346	382	413	400	464

Factory